ADVR-07FH

Universal 7 Amp with selectable Full-wave / Half-wave output
for self-excited brushless generators

ADVR-07FH built-in with EMI suppression circuitis and equipped with Under Frequency and Over Excitation Protection, also Soft Start Ramp Time for Voltage Build-up. The new design for digital voltage sensing and under frequency protection circuits improve thermal drift performance.

Features

Digital voltage sensing circuit and Under Frequency Protection circuit improve thermal drift characteristics
Excitation output Half Wave / Full Wave selectable
Soft start voltage ramping
Over excitation protection
EMI suppression
Built-in high capacity fuse

Specifications

Specifications
Sensing Input (Average Readings)	Voltage 90 to 540 Vac 1 phase 2 wire Frequency 50 / 60 Hz DIP switch setting
Adjustment	Adjustment 90 to 130 Vac @ 110 Vac 175 to 270 Vac @ 220 Vac 350 to 540 Vac @ 440 Vac
Power Input	Voltage 60 to 300 Vac 1 phase Frequency 40 to 60 Hz
Build Up Voltage	Residual voltage at power input > 5 Vac @ 25 Hz
Voltage Regulation	Less than +/- 0.5% (with 4% engine governing)
Soft Start Ramp Time	3 Seconds +/- 10%
Response Time	Less than 20 ms
EMI	Built-in electromagnetic interference filter
Voltage Thermal Drift	Less than 3% from -40 to +70 °C
U/F Knee Point Thermal Drift	Less than +/- 0.1 Hz from -40 to +70 °C
Static Power Dissipation	Max. 4 watts
External Voltage Adjustment	Max. +/- 10% @ 1 KΩ 1 watt potentiometer
Under Frequency Protection (Factory Presets)	50 Hz system knee point presets at 45 Hz 60 Hz system knee point presets at 55 Hz

Excitation Output, Resistance, O/E Voltage Protection and DIP SW Setting

	DIP SW3	Power Input	Excitation Output ^*1	Exciter Resistance	Excitation Output ^*2
Half Wave	ON	110 Vac	Continuous 31 Vdc 7A Max. 45 Vdc 10A 10 Sec	Min.4.5 Ohm, Max.100 Ohm	Excitation Voltage 43V +/-10%
Half Wave	ON	220 Vac	Continuous 63 Vdc 7A Max. 90 Vdc 10A 10 Sec	Min.9 Ohm, Max.100 Ohm	Excitation Voltage 85V +/-10%
Full Wave	OFF	110 Vac	Continuous 63 Vdc 7A Max. 90 Vdc 10A 10 Sec	Min.9 Ohm, Max.100 Ohm	Excitation Voltage 85V +/-10%
Full Wave	OFF	220 Vac	Continuous 125 Vdc 7A Max. 180 Vdc 10A 10 Sec	Min.18 Ohm, Max.100 Ohm	Excitation Voltage 170V +/-10%

1 Fuse specification 6.3 x 32 mm 10A Fast Blow type.
2 Excitation output will be turned off in 10 seconds time delay, Inverse-time curve. This function can be turned OFF.

Environment
Operating Temperature	-40 to +70 °C
Storage Temperature	-40 to +85 °C
Relative Humidity	Max. 95%
Vibration	5.5 Gs @ 60 Hz

Accessories
Jumper terminals	x 1
Jumper wire	x 2

Physical Specifications
Dimension	162.0 (L) x 112.0 (W) x 59.0 (H) mm 6.38 (L) x 4.41 (W) x 2.32 (H) inch
Weight	640 g +/-2% 1.41 lb +/-2%

DOWNLOADS

brochure

manual

Universal 7 Amp with selectable Full-wave / Half-wave output
for self-excited brushless generators

Specifications

Excitation Output, Resistance, O/E Voltage Protection and DIP SW Setting

Environment

Accessories

Physical Specifications

Quick Link

Product

ADVR-07FH

Universal 7 Amp with selectable Full-wave / Half-wave output for self-excited brushless generators

Specifications

Excitation Output, Resistance, O/E Voltage Protection and DIP SW Setting

Environment

Accessories

Physical Specifications

Universal 7 Amp with selectable Full-wave / Half-wave output
for self-excited brushless generators