PTM-15

DC Power Supply Module for ATS

PTM-15 DC Power Supply Module connects to the Utility and Standby AC power inputs of an Automatic Transfer Switch (ATS) and converts these voltages into a set of DC power outputs. It provides stable DC power supply to the control circuit for the Kutai ATS-245-DC controller or the DC-type BTB-ATS. It's the best solution when there is no DC power supply or difficult to obtain DC power.

Specifications

Specifications
AC Power Input (L, N)	Voltage 90 to 305 Vac 1 phase, 2-wire Frequency 50/60 Hz Fuse specification 5 x 20 mm S505-1A, slow blow Recommended wire size 1.25 mm² (AWG16)
DC Power Output (D+, D-)	Voltage 15 Vdc +/-1% Current Max. 0.6 A Recommended wire size 1.25 mm² (AWG16)
Protection Functions	DC Output Short Circuit Protection DC Output Over Voltage Protection

Environment
Operating Temperature	-20 to +60 °C
Storage Temperature	-40 to +85 °C
Relative Humidity	Less than 95%
Vibration	5.0 Gs @ 60 Hz

Physical Specifications
Dimensions	135.0 (L) x 100.0 (W) x 42.0 (H) mm 5.31 (L) x 3.94 (W) x 1.65 (H) inch
Weight	410 g +/-2% 0.9 lb +/-2%

DOWNLOADS

manual

DC Power Supply Module for ATS

Specifications

Environment

Physical Specifications

Quick Link

Product